Electrical Cabinet & Control Panel-
Display
Spindle Frequency
Display
The Control Panel houses the main interface to the machine.
1. Display.
2. Vacuum Pump 1 & 2 On/Off Switch: This turns the vacuum on and off.
3. USB Socket: This is used to input programs into the controller.
4. Emergency Stop Button: To reset the emergency stop, twist clockwise and it will pop out.
5. Electrical On/Off Switch: The Electrical On/Off switch connects the controller to the electrical supply and starts the processor.
6. Position Rod Switch- Turns On/Off & Engages the Locator Pins on the Vacuum Bed.
Vacuum Pump On/Off
Switch 1 & 2.
Position Rod Switch
Emergency Stop Button
Power On/Off Button
Electrical On/Off Switch
USB Socket/Port