Laguna Tools Smartshop Composite Fabricator 16 Manual page 34

Main / Home Screen Defined-
Hold
Run
Settings
Preview Program
Hold = The Hold button is used to Pause a program run. Press the Run button to continue.
NOTE: The spindle stays running during hold. Press stop button to stop the spindle and program.
Run = The Run button is used to start a CNC Program.
Preview Program = This button will open a visual representation of the active program in X and Y axis
and provide an estimated run time.
Settings = The settings button enters the Override / MDI screen. This is also accessible from the set-up
34
menu screen under CNC Settings.