Laguna Tools Smartshop Composite Fabricator 16 Manual page 28

From "Set-Up" Screen to CNC Tool Data-
"Tools Screen": This page is used for all data regarding Tooling Dimensions and Offsets
"Execute Automatic Touch Off (TTO)"
= Select the tool in which needs to be
measured and press "The Execute
Button". The machine will gather the
correct tool holder and proceed to the
TTO switch.
"Z" will rapid to the "Z" pre-
dimension in the machine settings
then slow until it finds the switch.
"Set Tool in Spindle" = This
field allows for the manual
adjustment of the active tool
physically in the spindle. If
you manually swap tool cones
around you must update the
machine so the active tool is
properly represented.
"Tool Touch Sensor Input" = This is an
indicator to verify the Tool Touch Off (TTO)
switch is working properly.
.
"Manual Setting of Tool length" =
Use the Jog function to move the
cutter to the table or work surface.
Press the "Teach Tool Length
Button" to measure the Z axis
distance.
Press "Set Tool Data" to write the
measurement to the machine
settings. Failure to press the "Set
Tool Data" will lose the measured
value.
28