Table of Contents
Advertisement
Types of Router Bits that can be used-
Types of Router Bits- There are five (5) basic types of router bits: 1.) Straight, 2.) Up Shear 3.) Down Shear, 4.) Combination
(also called compression), and 5.) Form Tools (round over, ogee, etc.).
1.) Straight Router Bits: These are the standard router bits that are commonly used with handheld routers and are readily available at home
centers.
2.) Up Shear Router Bits: These bits have flutes that are spiraled upward (a standard twist drill is an example of this type of bit). This bit design
removes the chips from the kerf but have a tendency to chip the top surface, especially veneers or melamine surfaces. Ball nose Router Bits are a
variation of the up shear bit design but have a radiused end. These bits are typically used for 3D surfacing applications.
Advertisement
Table of Contents
