Laguna Tools Smartshop Composite Fabricator 16 Manual page 12

Glossary of Main Components of the Smartshop (SUVII) Composite Fabricator (Cont'd.)-
8. Vacuum Table: Vacuum table has 6 zones for flexible use.
9. Tool Changer: Tool changer has 8 stations to accommodate a large range of tools.
10. Oiler: The oiler connects to all the relevant slides on the machine and when pumped by hand will lubricate all the relevant
slides.
More & Additional Safety Information for CNC Machine:
Additional instructions for the use of the CNC Machine: Like all machines, there is danger associated with the machine. Injury is
frequently caused by lack of knowledge or familiarity. Use this machine with respect. If normal safety precautions are overlooked
or ignored, serious personal injury may occur. As the CNC is under the control of the onboard machine controller, it is important
that you are clear of the cutter when operating the machine.
What you will receive with the Machine:
What is supplied with your machine will depend on the specification of the machine and extras that you order.