Equalised Slope Menu. Unit Locking Pin Submenu; If Attenuator Menu. If Equaliser Submenu - Televes Avant 5 Manual

User instructions
4.- EQUALISED SLOPE menu
- Scroll through the menu options: PE 0, ... , PE 9 (upwards or downwards)
- (pressed quickly) - Nothing
- (pressed for longer) - Nothing
- (pressed quickly) - Takes you to the IF attenuator menu
- (pressed for longer) - Saving and adjustment
UNIT LOCKING PIN submenu
- Increase or decrease each of the four digits (between 0 and 9)
- (pressed quickly) - Nothing
- (pressed for longer) - Returns to the main menu (equalisation slope)
- (pressed quickly) - To adjust the digits. The user can change the digit that the cursor is
on by using the arrows.
- (pressed for longer) - Saving and adjustment
The unit leaves the factory unlocked, to lock it you need to enter a four digit PIN using this
menu. Once this has been entered, you can see all the menus but you cannot change the
configuration of the unit and you cannot save / adjust it (not even with an external unit). While it
is locked, all the decimal points on the display of the remote control menus are lit (indicating
locking status). To unlock the unit, you need to enter the PIN again.
Note: The unit can be unlocked with an adjustment control if necessary (forgotten or lost PIN,
etc).
5.- IF ATTENUATOR menu
- Scroll through the menu options: FI --, FI00, ... , FI24 (upwards or downwards)
- (pressed quickly) - Nothing
- (pressed for longer) - Accesses the extended menu (IF equaliser submenu)
- (pressed quickly) - Takes you to the LNB level menu
- (pressed for longer) - Saving and adjustment
IF EQUALISER submenu
- Scroll through the menu options: EFI0, ... , EFI9, EF10, EF11, EF12 (upwards or down-
wards)
- (pressed quickly) - Nothing
- (pressed for longer) - Returns to the main menu (IF attenuator)
- (pressed quickly) - Nothing
- (pressed for longer) - Saving and adjustment
56
"Avant 5"