Using The Menus; Input Configuration Menu. Input Levels Submenu; Channel Programming Menu. Filter Programming Submenu - Televes Avant 5 Manual

User instructions

Using the menus

1.- INPUT CONFIGURATION menu
- Scrolls through the menu options: E9-0, E7-2, E6-3 (upwards or downwards)
- (pressed quickly) - Nothing
- (pressed for longer) - Enters the extended menu (input levels)
- (pressed quickly) - Changes to the channel programming menu
- (pressed for longer) - Saving and adjustment
INPUT LEVELS submenu
- Scrolls through the menu options: AU, on, oF (the corresponding input level in automa-
tic mode, on and off respectively).
For example:
1 AU : UHF1 input powering in automatic mode
2 on : UHF2 input powering activated
3 oF : UHF3 input powering disactivated
- (pressed quickly) - Nothing
- (pressed for longer) - Returns to the main menu (Input configuration)
- (pressed quickly) - To the next level (scrolls through the three UHF inputs)
- (pressed for longer) - Preparing to erase channels (Clr)
ERASING CHANNELS
Once the user is in this option (the display indicates "Clr") it is necessary to confirm
the erasing of the current programming of the filters (by pressing the
time) or to stop the operation (by pressing the
the user back to the input level submenu). None of the remaining buttons are functional.
(1) Note: Via this menu, you can configure the input powering manually. Those which are
configured in AU mode will be set by the unit during the adjustment process.
2.- CHANNEL PROGRAMMING menu
0C-- : There are no channels in filter 0
0C21 : There is one channel in filter 0 (flashes when digital)
0 2c : There are two channels in filter 0
0 3c : There are three channels in filter 0
0 4c : There are four channels in filter 0
0 5c : There are five channels in filter 0
- If beginning with an empty filter, it is possible to program a single channel in the filter
(which will be considered analogue) without having to enter the filter programming subme-
nu. For any other programming option, the user must access the submenu.
- (pressed quickly) - Nothing
- (pressed for longer) - Enters the extended menu (filter programming submenu)
- (pressed quickly) - Goes to the next channel (the next main menu)
- (pressed for longer) - Saving and adjustment
(1)
button for a long time which will take
53 53
"Avant 5"
button for a long