Fm Configuration - Televes Avant 5 Manual

User instructions
6.- FM CONFIGURATION menu
The next menu is FM Configuration:
- Allows to activate/deactivate the FM input. In Manual Adjustment allows to increase or decrease the level of
the filter one dB per press (once the filter has already been adjusted automatically).
- (short press) - Places the cursor on the position of the FM filter or on the manual adjustment of the FM filter
(Offset).
- (long press) - Enters the extended menu.
- (short press) - Changes to the Input Configuration menu
- (long press) - Saving and adjustment
Procedure
Press the button to activate (blinks) the option -FM-. Use
input.
FM Config
----------
FM: OFF
Offset: --
After performing an automatic adjustment of the unit, the Offset function is activated.
This option allows to increase or decrease the level of the selected filter one dB per press (once the automatic adjus-
ment has been made). The display will blink during the readjusment process (one dB per press). Once the readjustment
has finished the reached valued will be shown, informing whether it was possible or not to increase/decrease the output
level. It will not be able to readjust if it goes back to the previous value.
FM Config
----------
FM: OFF
Offset: +0dB
Note:
- The manual adjustment (Offset) will only be accessible if the unit has already been adjusted and the FM input is
active (VHF: ON). After the automatic adjustment the offset will be initialized at 0dB.
Example:
FM Config
----------
FM: ON
FM input activated. Manual adjustment at +3dB.
Offset: +3dB
FM Config
----------
FM: OFF
Offset: --
FM Config
----------
FM: ON
Offset: +2dB
45
buttons to activate (ON) or deactivate (OFF) the FM
FM Config
----------
FM: ON
Offset: --
"Avant 5"