Output Level Menu. Manual Adjustment Submenu - Televes Avant 5 Manual

User instructions
FILTER PROGRAMMING submenu
- Scroll through the menu options: 0A--, 0A21, ..., 0A69. Used to specify the channel
that is programmed in each of the five filter positions (the user can program one to five
analogue and/or digital channels per filter). Selects a channel type (A/D) after pressing
the button briefly(A/d change activated).
- (pressed quickly) - A/d change flashing (the type of channel is selected using the arrows)
- (pressed for longer) - Returns to the main menu (Channel programming).
- (pressed quickly) - Selection of the position within the filter. This lets the user scroll
For example:
0A--.
0A3.2 : Channel 32 programmed in the second filter position
0A.33 : Channel 33 programmed in the third filter position
0.A--
0A--
- (pressed for longer) - Saving and adjustment
Note: The display will flash if trying to program something illegal (filter overlap or band-
width greater than 5 channels).
3.- OUTPUT LEVEL menu
- Scroll through the menu options: U100, ..., U111 (upwards or downwards).
- (pressed quickly) - Nothing
- (pressed for longer) - Accesses the extended menu (manual adjustement submenu)
- (pressed quickly) - Changes to the equalisation slope menu
- (pressed for longer) - Saving and adjustment
MANUAL ADJUSTMENT submenu
- Lets you increase or decrease the filter level (once adjusted) one dB every time it is
pressed ). The display will flash during the readjustment process (one dB every time it
is pressed). Once the user has finished, the value reached will be displayed, being
memorized directly by the amplifier, which will reveal whether it has been possible to
inc/dec the output level (for example: 0U+1, 3U-2...). If it returns to the original value,
the readjustment has not been possible.
- (pressed quickly) - Nothing
- (pressed for longer) - Returns to the main menu (Output level)
- (pressed quickly) - Scrolls through all the filters: 1U --, ..., 9U --, 0U -- (the first digit
- (pressed for longer) - The manual adjustment is eliminated from the single channel and
Note: The empty filters appear as 0U-- and the arrows do not indicate anything in this
case. The filters which have a programmed channel will appear - after the unit has
been automatically adjusted - as OU 0, and here the first digit indicates the filter
number and the last digit indicates the number of dBs that were adjusted manually
(-9 ... 0 ... +9).
through the five channel positions that can be programmed for each
filter.
: First free position in filter 0
: Fourth free position in filter 0
: Fifth free position in filter 0 (no dot)
indicates the filter number)
a new automatic adjustment is carried out in the unit.
54 54
"Avant 5"