Unit Locking Pin - Televes Avant 5 Manual

User instructions
5.- UNIT LOCKING PIN menu
The following menu is Unit locking PIN.
- Allows to increase or decrease each of the four digits of the password, the first between 0 ..7 and the rest
between 0 .. 9 (0000 .. 7999).
- (short press) - Places the cursor on the digits to be modified.
- (long press) - Enters the main menu and activates the locking.
- (short press) - Changes to Filter Status menu.
- (long press) - Saving and adjustment.
Procedure
The unit leaves the factory unlocked, to lock it you need to enter a four digit PIN using this menu.
Press the button to activate the first digit that composes the PIN. Use
0 y 7. Press again the to activate the second digit and repeat the previous process to select a number between 0
and 9. Repeat untill you complete the code.
Password
--------
0 0 0 0
Once this code has been entered you must confirm it with a long press on the
all the menus but you cannot change the configuration of the unit and you cannot save / adjust it (not even with the exter-
nal reset button).
While it is locked, all the menus of the programming unit show
enter the PIN again in this menu following the same procedure (enter code and then confirm with a long press of the
button) and the unit will be unlocked.
Example:
Config. FI
Aten: 7dB
IF configuration menu in a password locked unit
EQ: 3dB
LNB: 13V/ON
Status info
-----------
(the status menu also informs of this locking)
The unit
has password
Password
--------
0 0 0 0
49
buttons to select a number between
Password
--------
6 0 0 0
button. From now on, you can see
indicating this state. To unlock the unit, you need to
"Avant 5"
Password
--------
6 0 0 0