Table of Contents
Advertisement
Available languages
Available languages
User instructions
How to use the unit. Universal Programming Unit PCT 3.0
How to use the programmer
This system is programmed by the Universal Programmer 3.0. The programming unit has a menu with various
options which the user can scroll through by pressing the
- Configuration of the system's UHF inputs (number of filters per input).
- Switching off of the VHF and/or FM inputs.
- Select the channels for each filter (maximum 5 consecutive channels per filter).
- Set the UHF output level (it determines the VHF and FM levels).
- Set the UHF equalisation slope.
- Set the IF attenuation.
- Select the powering voltage for the LNB.
The buttons and LEDs indicate the following:
LEDs:
Indicates
"Main menu" mode
Buttons:
/
- Menu or submenu options.
- (pressed for a short time) - To change the submenu options.
- (pressed for longer) - To change from the main menu to the extended menu.
- (pressed for a short time) - To scroll through the main menus.
- (pressed for longer) - To save and adjust (from any menu or submenu).
Once connected, the programmer receives the previously set parameters from the Avant unit (memorised channel in
each single-channel, input configuration, output level . . .).
The programming unit begins by accessing the "Input configuration" menu so that by pressing the menu selection
button
, we can scroll through the different options and with the
Once all of the system's options have been selected, press the adjustment button
the Avant's green adjustment LED on) and the unit automatically records and sets up all the parameters selected with
the programming unit.
NOTE: To carry out the level adjustment process, it is necessary to terminate the two outputs of the unit with a
75 ohms impedance (ref. 4061), without needing to load the unused inputs, see fig. 1.b (page 62).
The adjustment button
are using, except for when we are in the input level submenu.
A
B
C
Indicates "Extended menu" mode
can be pressed (for a longer time) at any moment, regardless of the menu option that we
button and which allow the following functions:
Indicates "Saving" mode
buttons we can select the desired parameters.
51
51
"Avant 5"
for a long time (this switches
Advertisement
Chapters
Table of Contents
