Description; Using The Unit. Universal Programming Unit; Using The Programming Unit - Televes avant 7 User Instructions

Description

Programmable head-end amplifier for use in both single family buildings
U1: 10
U1: 10
or in communal buildings, characterised by: ease of installation, simple
U2: 0
FILTER FILTER FILTER FILTER
U2: 0
programming, high gain, external programmer, low consumption powering. FILTER FILTER
1 2 3 4
1 2
U3: 0
U3: 0
It features 10 input filters to be distributed by software into 3 UHF ports.
U1: 10
The number of filters per input can be selected among three possible
U2: 0
FILTER FILTER FILTER FILTER
1 2 3 4
configurations (10-0-0, 9-0-1, 7-2-1, 6-3-1 and 5-3-2), which will be carried
U3: 0
U1: 10
out according to the channels that are received by each antenna (see figure
U2: 0
below).
FILTER FILTER FILTER FILTER
1 2 3 4
U3: 0
U1: 10 U1: 9
U1: 9
U2: 0
U2: 0 FILTER FILTER FILTER FILTER
U2: 0
FILTER FILTER FILTER FILTER FILTER FILTER
1 2 3 4
1 2 1 3 2 4
U3: 1
U3: 0
U3: 1
U1: 10
U1: 9
U2: 0
U2: 0
FILTER FILTER FILTER FILTER FILTER FILTER FILTER FILTER
1 2 3 4
1 2 3 4
U3: 0
U3: 1
U1: 9
U2: 0
FILTER FILTER FILTER FILTER
1 2 3 UHF1 4
U3: 1
U1: 9 U1: 7
U1: 7
U2: 0 U2: 2
FILTER FILTER FILTER FILTER FILTER FILTER FILTER FILTER
U2: 2 FILTER FILTER
1 1 2 2 3 3 4 4
1 2
U3: 1
U3: 1
UHF1
U3: 1
U1: 9
U1: 7
U2: 0
FILTER FILTER FILTER FILTER
U2: 2
FILTER FILTER FILTER FILTER
1 2 3 4
1 2 3 4
U3: 1
U3: 1
UHF1
U1: 7
U2: 2
FILTER FILTER FILTER FILTER
1 2 3 UHF1 4
UHF1
U3: 1
U1: 7
U1: 6
U1: 6
U2: 2
FILTER FILTER FILTER FILTER
U2: 3
FILTER 1 FILTER 2 FILTER 3 FILTER 4
U2: 3 FILTER FILTER
1 2 3 UHF1 4
U3: 1
1 2
U3: 1
UHF1
U3: 1
U1: 7
U1: 6
U2: 2
FILTER FILTER FILTER FILTER
1 2 3 4
U2: 3
FILTER FILTER FILTER FILTER
U3: 1
1 2 3 4
UHF1
U3: 1
U1: 6
U2: 3 FILTER FILTER FILTER FILTER
UHF1
1 2 3 4
UHF1
U3: 1
U1: 6
U1: 5
U1: 5
U2: 3 FILTER FILTER FILTER FILTER
U2: 3
FILTER 1 FILTER 2 FILTER 3 FILTER 4
U2: 3
FILTER FILTER
UHF1
1 2 3 4
U3: 1
1 2
U3: 2
U3: 2 UHF1
U1: 6
U1: 5
U2: 3
FILTER FILTER FILTER FILTER
1 2 3 4
U2: 3
FILTER FILTER FILTER FILTER
U3: 1
1 2 3 4
U3: 2 UHF1
U1: 5
These inputs are pre-amplified. Any UHF channel can be selected (21 to 60)
U2: 3
FILTER FILTER FILTER FILTER
for any filter, and each filter can be adjusted for a bandwidth up to 5 channels.
UHF1
1 2 3 4
U3: 2
U1: 5
U2: 3
FILTER FILTER FILTER FILTER
1 2 3 4
UHF1
U3: 2
U1: 5
UHF
U2: 3
FILTER FILTER FILTER FILTER
1 2 3 4
U3: 2
FILTER FILTER FILTER FILTER FILTER FILTER
FILTER FILTER FILTER FILTER FILTER FILTER
UHF
C ... C
C
n n+5
n
FILTER FILTER FILTER FILTER FILTER FILTER
UHF
C ... C
UHF
FILTER FILTER FILTER FILTER FILTER FILTER n n+5
The output levels of the filters are automatically balanced with a certain band
compensation slope.
FILTER FILTER FILTER FILTER FILTER FILTER
C ... C
UHF
The UHF inputs also disposes of an automatic powering system that is able n n+5
to withstand short circuits.
C ... C
FILTER FILTER FILTER FILTER FILTER FILTER
n n+5
The gain is regulated by an automatic attenuation system in both FM
BIII/DAB inputs.
C ... C
The amplifier disposes of a broadband input (47-862 MHz), intended for
n n+5
possible expansions in the system, such as the inclusion of a satellite head-
end or TDT's.
The amplification with sloped gain between 950-2150 MHz
to the most recent installation needs, as is the incorporation of digital
television in communal TV installations, and it reinforces its use in ICT
(Spanish regulations) distributions.
The mixing of the MATV band and the IF band
system that guarantees the absence of interferences between channels from
both bands.
(1) 532970 => BI/FM
(2) Available in ref. 532840
UHF1
UHF1
FILTER FILTER FILTER FILTER FILTER FILTER
FILTER FILTER FILTER FILTER FILTER FILTER FILTER FILTER
5 6 7 8 9 10
3 4 5 6 7 8 9 10
UHF1
FILTER FILTER FILTER FILTER FILTER FILTER
5 6 7 8 9 10
UHF1
FILTER FILTER FILTER FILTER FILTER FILTER
UHF1 UHF3
UHF1
UHF1
5 6 7 8 9 10
FILTER FILTER FILTER FILTER FILTER FILTER
FILTER FILTER FILTER FILTER FILTER FILTER FILTER FILTER FILTER FILTER FILTER FILTER FILTER
5 6 7 8 9 10
3 5 4 6 5 7 6 8 7 9 8 10 9
UHF1
UHF1 UHF3
FILTER FILTER FILTER FILTER FILTER FILTER FILTER FILTER FILTER FILTER FILTER FILTER
5 6 7 8 9 10
5 6 7 8 9 10
UHF1
UHF3
FILTER FILTER FILTER FILTER FILTER FILTER
UHF1 UHF2 UHF3 UHF3
5 6 7 8 9 10
UHF1 UHF2
FILTER FILTER FILTER FILTER FILTER FILTER FILTER FILTER FILTER FILTER FILTER FILTER
FILTER FILTER FILTER FILTER FILTER FILTER FILTER
5 5 6 6 7 7 8 8 9 9 10 10
3 4 5 6 7 8 9
UHF1 UHF3
UHF2 UHF3
FILTER FILTER FILTER FILTER FILTER FILTER
FILTER FILTER FILTER FILTER FILTER FILTER
5 6 7 8 9 10
5 6 7 8 9 10
UHF2 UHF3
FILTER FILTER FILTER FILTER FILTER FILTER
UHF2 UHF3
5 6 7 8 9 10
UHF2 UHF3
UHF1
UHF2
FILTER FILTER FILTER FILTER FILTER FILTER
FILTER 5 FILTER 6 7 FILTER FILTER 8 FILTER 9 FILTER 10
FILTER FILTER FILTER FILTER FILTER FILTER FILTER
UHF2 UHF3
5 6 7 8 9 10
3 4 5 6 7 8 9
UHF2 UHF3
FILTER FILTER FILTER FILTER FILTER FILTER
5 6 7 8 9 10
FILTER FILTER FILTER FILTER FILTER FILTER
5 6 7 8 9 10
UHF2 UHF3
FILTER FILTER FILTER FILTER FILTER FILTER
5 6 7 UHF2 8 9 UHF3 10
UHF2 UHF3
UHF1 UHF2
FILTER FILTER FILTER FILTER FILTER FILTER
FILTER 5 6 FILTER FILTER 7 FILTER 8 9 FILTER FILTER 10
FILTER FILTER FILTER FILTER FILTER FILTER
5 6 7 UHF2 8 9 UHF3 10
3 4 5 6 7 8
UHF2 UHF3
FILTER FILTER FILTER FILTER FILTER FILTER
5 6 7 8 9 10
FILTER FILTER FILTER FILTER FILTER FILTER
5 6 7 8 9 10
UHF2 UHF3
FILTER FILTER FILTER FILTER FILTER FILTER
UHF2 UHF3
5 6 7 8 9 10
FILTER FILTER FILTER FILTER FILTER FILTER
5 6 7 8 9 10
UHF2 UHF3
UHF
FILTER FILTER FILTER FILTER FILTER FILTER
5 6 7 8 9 10
... C
n+5
, is a response
(2)
is carried out by a filtering
(2)

Using the unit. Universal Programming Unit

Using the programming unit

This system is programmed by the Universal Programmer 7234.
programming unit has a menu with various options which the user can scroll
through by pressing the
- Configuration of the system's UHF inputs (number of filters per input):
- Switching off of the VHF and/or FM inputs.
UHF3
- Select the channels for each filter (max. 5 consecutive channels per filter).
- Set the UHF output level (it determines the VHF and FM levels).
FILTER
10
- Set the UHF equalisation slope.
- Set the IF configuration
The buttons and LEDs indicate the following:
UHF3
LED´s
FILTER
10
A Indicates "Main Menu" mode.
B
Indicates "Extended Menu" mode.
C
Indicates "Saving" mode.
Buttons
/ Menu or submenu options.
UHF3
(short press) - To change the submenu options.
FILTER
10
(long press) - To change from the main menu to the extended
(short press) - To scroll through the main menus.
(long press) - To save and adjust (from any menu or submenu).
+ + Increases the contrast of the screen.
UHF3
+ + Decreases the contrast of the screen.
FILTER FILTER
+ Enters the "Load Settings" menu.
9 10
+ Enters the "Copy Settings" menu.
Once connected, the programmer receives the previously set parameters from
the Avant unit (memorised channel in each cluster, input configuration, output
level . . .).
PCT firmware
------------
V:x.xx
The programming unit begins by accessing the "UHF CONFIG" menu so that
by pressing the menu selection button , we can scroll through the different
Unit
options by pressing the
firmware
desired parameters.
version:
V:x.xx
Once all of the system's options have been selected, press the adjustment
button for a long time (this switches the Avant's green adjustment LED on)
and the unit automatically records and sets up all the parameters selected with
and
(1)
the programming unit.
Note: To carry out the level adjustment process, it is necessary
The adjustment button can be pressed (long press) at any time independently
of the option of the menu the Avant is (except in the Copy and Load settings
menu).
button and which allow the following functions:
.
(2)
menu.
PCT firmware
version
------------
V:x.xx
Unit
version
firmware
version:
V:x.xx
button and with the buttons we can select the
to terminate the two outputs of the unit with a 75 ohms
impedance (ref. 4061), without needing to load the un-
used inputs, see fig. on page 17.
5
The
EN