To Set The Fax Header - HP MFP Analog Fax Accessory 300 Fax Manual

To verify or change the location, complete the following steps.
1
2
3
4
5
6

To set the fax header

The fax header setting is used to set a phone number and company
name that are placed in the fax header. This information is required
and must be set.
To verify or change the phone number and the company name,
complete the following steps.
1
2
3
4
5
6
7
8
If the fax icon is displayed on the control panel screen and does not
have Not Configured written across, you have completed all
necessary setup. To send a fax, see Chapter 2, Faxing, for
information about sending faxes.
24 Chapter 1 Setting up
On the control panel, press the Menu button to display the main
menu.
Touch FAX to display the fax menu.
Touch FAX SETUP REQUIRED to display the required settings
menu.
Touch FAX HEADER to display the header settings.
Touch LOCATION to display the list of countries/regions.
Scroll through the list until your country/region is displayed, and
then touch the country/region to select it.
On the control panel, press the Menu button to display the main
menu.
Touch FAX to display the fax menu.
Touch FAX SETUP REQUIRED to display the required settings
menu.
Touch FAX HEADER to display the settings.
Touch PHONE NUMBER to display the keyboard.
Enter a phone number, and then touch OK to return to the Fax
Header menu.
Touch COMPANY NAME to display the keyboard.
Type the company name, and then touch OK to complete the
setting.
ENWW