Making Required Fax Settings - HP MFP Analog Fax Accessory 300 Fax Manual

Making required fax settings

For the HP LaserJet 4730mfp, a Fax Configuration Wizard is available
Note
to guide you through the steps to make the required fax settings. For
more information, see "Fax Configuration Wizard for the
HP LaserJet 4730mfp" on page 21.
Once the fax accessory is installed, you must make certain settings
before you can use the accessory. If these settings are not made, the
fax icon is displayed, grayed-out with Not Configured written across
it. These settings include:
●
●
●
This information is used in the fax header, which is printed on all
outgoing faxes.
The fax accessory, when first installed, may read some of these settings
Note
from the MFP, thus, a value may already be set. You should check the
values to verify that they are set and correct.
In the U.S. and many other countries/regions, setting the date, time,
Note
location, phone number, and company name is a legal requirement for
fax.
Fax Configuration Wizard for the
HP LaserJet 4730mfp
The Fax Configuration Wizard guides users through a step-by-step
procedure to configure fax settings that are required to use the fax
feature on the HP LaserJet 4730mfp. If the settings are not
configured, the fax feature is disabled.The following is a list of fax
settings that are configured using the wizard:
●
●
●
●
This information is used in the fax header, which is printed on all
outgoing faxes.
If you do not want to include information for one of the settings, click
Back or Cancel. The wizard then goes to the next screen. For
example, if you do not want to include the company name on the
outgoing faxes, select Cancel.
ENWW
Date and time
Location (country/region)
Fax header (phone number and company name)
Date, time, and time zone
Location (country/region)
Fax phone number
Company name
Making required fax settings 21