Using The Printer Control Panel - HP Jetdirect J7949e Administrator's Manual

Using the Printer Control Panel

When supported by the printer, HP Jetdirect print servers provide
a configuration menu that can be accessed from the printer's control
panel. Using this menu, you can enable or disable network protocols
and set basic network parameters. For a summary of the available
menu items, see
Note
When accessing the HP Jetdirect menu from the printer's control
panel, the TCP/IP network configuration parameters that you can
set include the following:
●
IP host name
● DHCP lease behavior (release or renew)
● IP address of the print server
●
Subnet mask
●
Default gateway address
● Syslog server address
●
Idle timeout period
If you need to configure more TCP/IP parameters than allowed by
control panel configuration, use an alternate configuration tool
(such as Telnet or the embedded Web server).
If the HP Jetdirect print server is configured to receive its TCP/IP
configuration from the printer control panel, the configuration is
saved on the print server when powered off/on.
ENWW
Appendix B.
For instructions on using the control panel for your
printer, refer to your printer documentation.
TCP/IP Configuration 89