HP Jetdirect J7949e Administrator's Manual page 217

Table B.1 HP Jetdirect Control Panel Menu (3 of 7)
Menu Item
IPX/SPX
APPLETALK
DLC/LLC
ENWW
Options
PROXY SERVER
PROXY PORT
ENABLE
FRAME TYPE
ENABLE
ENABLE
The HP Jetdirect Control Panel Menu 217
Description of settings
Specifies the proxy server to be used by
embedded applications in your printer/MFP.
A proxy server is typically used by network
clients for Internet access. It caches Web
pages, and provides a degree of Internet
security, for those clients.
To specify a proxy server, enter its IP
address or fully-qualified domain name. The
name can be up to 64 characters.
For some networks, you may need to contact
your Independent Service Provider (ISP) for
the proxy server address.
Enter the port number used by the proxy
server for client support. The port number
identifies the port reserved for proxy activity
on your network, and can be a value from 0
to 65535.
ON: Enable the IPX/SPX protocol
●
● OFF: Disable the IPX/SPX protocol
Selects the frame type setting for your
network.
AUTO (default): Automatically sets and
●
limits the frame type to the first one
detected.
● EN_8023, EN_II, EN_8022, EN_SNAP:
Frame type selections for Ethernet
networks.
(Ethernet/Fast Ethernet only)
● ON: Enable the AppleTalk protocol
● OFF: Disable the AppleTalk protocol
● ON: Enable the DLC/LLC protocol
● OFF: Disable the DLC/LLC protocol