Resetting To Factory Defaults - HP Jetdirect J7949e Administrator's Manual

Resetting to Factory Defaults

Parameters on the HP Jetdirect print server (for example, the
IP address) can be reset to factory default values using the following
procedures:
CAUTION
●
HP LaserJet Printer with Embedded Print Server
In most cases, the HP Jetdirect print server can be reset to
factory defaults when a cold-reset is performed on the printer.
For several HP LaserJet printers, a cold-reset is performed by
power cycling the printer while pressing the Start, or
Pause/Resume, button. For other printers, refer to your printer
manuals. Or, visit
document file bpj02300.html.
Note
CAUTION
After a cold reset, your network systems may lose their connection
to the printer.
ENWW
A Jetdirect X.509 certificate, installed for SSL/TLS
secure Web services, will be saved over a cold reset
to factory default values. However, a Certificate
Authority (CA) certificate installed to validate a
network authentication server will not be saved.
http://www.hp.com/go/support
Some printers provide a factory reset option for
the printer through the printer's control panel.
However, this reset option for the printer may not
reset the HP Jetdirect print server. When you
attempt to reset to factory default values, print a
Jetdirect configuration page to confirm that
factory-reset values have been assigned.
Resetting the printer will reset all printer settings
to their factory defaults. After resetting the printer,
users may be affected due to changes in
user-specified printer settings.
Troubleshooting the HP Jetdirect Print Server 166
and search for