HP Jetdirect J7949e Administrator's Manual page 104

Misc. Settings
The Miscellaneous Settings parameters allow you to set a variety
of advanced protocols and features, as described below.
See Table 4.5.
Table 4.5 Miscellaneous Settings (1 of 4)
Item
SLP Config
Telnet Config
mDNS
Multicast IPv4
9100 Config
FTP Printing
LPD Printing
IPP Printing
ENWW
Description
Enable or disable SLP (Service Location Protocol), used by
selected client application software to automatically discover and
identify the HP Jetdirect print server.
Enable or disable access to HP Jetdirect configuration
parameters using Telnet. For more information, see
Enable or disable Multicast Domain Name System (mDNS)
services. mDNS is typically used on small networks for IP address
and name resolution (through UDP port 5353) where a
conventional DNS server is not used.
Enable or disable the receipt and transmission of IP version 4
multicast packets by the print server.
Enable or disable port 9100 services. Port 9100 is an
HP-proprietary raw TCP/IP port on the HP Jetdirect print server
and is the default port for printing. It is accessed by HP software
(for example, the HP Standard Port).
Enable or disable File Transfer Protocol services available on the
HP Jetdirect print server for printing. For more information, see
Chapter 6.
Enable or disable the Line Printer Daemon services on the
HP Jetdirect print server. LPD on the HP Jetdirect print server
provides line printer spooling services for TCP/IP systems. For
more information, see
Enable or disable the Internet Printing Protocol on the
HP Jetdirect print server. If the printer is properly connected and
accessible, IPP allows printing to this device over the Internet (or
intranet). A properly configured IPP client system is also required.
For information on IPP client software, see
Chapter 5.
Using the Embedded Web Server 104
Chapter 3.
Chapter 2.