HP xw4400 Service And Technical Reference Manual page 102

2. Disconnect the data 1 and power 2 cables from the hard drive.
Figure 4-42
3. Lift up on the green drive-lock release tab 1 and slide the hard drive 2 out of the chassis.
Figure 4-43
To install a SAS hard drive:
1. Disconnect power from the system
access panel
92 Chapter 4 Removal and replacement procedures
Removing the hard drive
Removing the hard drive
(Predisassembly procedures on page
(Side access panel on page 66).
60) and remove the side
ENWW