Receiving Faxes By Making A Phone Call - Epson WorkForce WF-2870 Series User Manual

Faxing
>
Receiving Faxes on the Printer
❏ When you pick up the handset within the number of rings set in Rings to Answer:
- If the ringing is for a fax: You can receive the fax using the same steps as for Manual. Select Fax on the
printer's home screen, press the
the handset.
- If the ringing is for a voice call: You can answer the phone as normal.
❏ When the ringing stops and the printer automatically switches to receive faxes:
- If the ringing is for a fax: The printer starts receiving faxes.
- If the ringing is for a voice call: You cannot answer the phone. Ask the person to call you back.
Note:
Set the number of rings to answer for the answering machine to a lower number than the number set in Rings to Answer.
Otherwise, the answering machine cannot receive voice calls to record voice messages. For details on setting up the answering
machine, see the manual supplied with the answering machine.
Related Information
"Usage of Manual Mode" on page 145
&
Usage of Manual Mode
This mode is mainly for making phone calls, but is also for faxing.
Receiving Faxes
When the telephone rings, you can answer the ringing manually by picking up the handset.
❏ When you hear a fax signal (baud):
Select Fax on the printer's home screen, press the
button. Next hang up the handset.
❏ If the ringing is for a voice call:
You can answer the phone as normal.
Receiving Faxes Using only the Connected Telephone
When Remote Receive is set, you can receive faxes by simply entering the Start Code.
When the telephone rings, pick up the handset. When you hear a fax tone (baud), dial the two digit Start Code,
and then hang up the handset.

Receiving Faxes by Making a Phone Call

You can receive a fax stored on another fax machine by dialing the fax number.
Related Information
"Receiving Faxes by Polling (Polling Receive)" on page 146
&
>
Receiving Faxes by Making a Phone Call
button to select receiving a fax, and then press the
button to select receiving a fax, and then press the
145
x
button. Next hang up
x