Connecting To Android Devices Using Wi-Fi Direct - Epson WorkForce WF-2870 Series User Manual

Network Settings
>
For smart devices that have been connected to the printer before, select the network name (SSID) on the smart
device's Wi-Fi screen to connect them again.
Related Information
"Connecting to Devices other than iOS and Android using Wi-Fi Direct" on page 29
&
"Printing from Smart Devices" on page 114
&

Connecting to Android Devices using Wi-Fi Direct

This method allows you to connect the printer directly to your Android device without a wireless router. The
following conditions are required to use this function.
❏ Android 4.4 or later
❏ Epson iPrint version 7.0 or later
Epson iPrint is used to print from a smart device. Install Epson iPrint on the smart device in advance.
Note:
You only need to make these settings for the printer and the smart device that you want to connect to once. Unless you
disable Wi-Fi Direct or restore the network settings to their defaults, you do not need to make these settings again.
1. Select
on the home screen.
To select an item, use the
2. Select Wi-Fi Direct.
3. Press the OK button.
Connecting to a Smart Device
u d l r
buttons, and then press the OK button.
>
Connecting to Android Devices using Wi-Fi Direct
27