Table of Contents
Advertisement
Scanning
>
Scanning from a Computer
1. Place the originals.
By placing multiple originals on the scanner glass, you can scan them all at the same time. Make sure there is a
gap of at least 20 mm between the originals.
Note:
You cannot use ADF when scanning from Photo Mode.
2. Start Epson Scan 2.
3. Select Photo Mode from the Mode list.
4. Make the following settings on the Main Settings tab.
❏ Image Type: Select the color for saving the scanned image.
❏ Resolution: Select the resolution.
Note:
The Document Source setting is fixed as Scanner Glass, and the Document Type setting is fixed as Reflective.
(Reflective means originals which are not transparent, for example ordinary papers or photos.) You cannot change these
settings.
>
Scanning Using Epson Scan 2
134
Advertisement
Table of Contents
