If the Flexible Disk Drive Does Not Work
1 Ensure you are using a formatted diskette and it is inserted
correctly.
2 Check you are using a diskette that is the right density.
3 Check that the flexible disk drive has not been disabled in SETUP
(refer to page 77). There are three options in the
section of SETUP which may be used to disable or enable:
Features
the flexible disk drives
•
start from flexible disk
•
writing to flexible disks.
•
4 Check that the disk power and data cables are correctly connected
(refer to chapter 3).
5 Clean the flexible disk drive using a "wet-cleaning diskette kit".
If the Hard Disk Does Not Work
1 Check that the hard disk drive has not been disabled in SETUP (refer
to page 77). There are two options in the
section of SETUP which may be used to disable or enable:
the hard disk drives
•
start from hard disk.
•
2 Check that the disk power and data cables are correctly connected
(refer to chapter 3).
3 Check that power management has been correctly configured.
4 If the hard disk has not been detected, use the Custom parameters
in SETUP.
4 Troubleshooting Your PC and Using the SETUP Program
If Your PC Has a Hardware Problem
Security Features
Security
English
71