Installing A 3.5-Inch Device In The Bottom Shelf - HP Vectra XM5 3 User Manual

3 How to Install Accessories Inside Your PC
Installing Mass Storage Devices

Installing a 3.5-inch Device in the Bottom Shelf

A slim (1-inch high) 3.5-inch front access drive can be installed in the
bottom shelf.
NOTE Disk drives ordered from HP are supplied with mounting rails. If you
order your drive from another supplier, you will need to order drive
mounting rails from HP.
You should order product number D3566A (3.5-inch disk drive rails).
1 Disconnect the computer's power supply cord.
2 Remove the computer's cover (see page 24).
3 If there is a device in the middle shelf, remove it.
4 If there is no device in the middle shelf, remove the RFI bezel.
English 49