Table of Contents
Advertisement
4 Troubleshooting Your PC and Using the SETUP Program
Using the HP SETUP Program
Understanding the SETUP Program
The built-in SETUP program is accessed by pressing
PC's Power-On-Self-Test. For more information about SETUP items
press
for context-sensitive online help.
The SETUP items displayed on your screen may differ from those
shown below.
SETUP Item:
Date
Time
User Preferences
PC Serial Number
BIOS Version
Processor
Computer Speed
Memory Size
Memory Cache
Power Management
Hard Disk Drives
78
English
What you can do:
Set date and time
Set a Password to prevent unauthorized access to your PC
Enable/Disable the Keyboard Lock Timer
Enable/Disable Screen Blanking
Set the: Keyclick Volume, Character Repeat Speed, Autorepeat
Delay, Numlock On/Off at power up.
View the PC Serial Number
View the BIOS Version Number
View the type of processor in your PC
View the speed of the processor
View the memory size of:
• Base Memory on system board
• Reserved Memory
• Extended Memory
• Total Memory
Switch both Internal and External Cache Memory Off/On
Enable/Disable 'Standby' mode
Enable/Disable 'Sleep At' mode
Configure the hard disk drives (if not automatically detected, set to
None for SCSI or Custom to manually configure a drive)
Define if the hard disk controller is integrated on an accessory board
during the
Advertisement
Table of Contents
