HP Vectra XM5 3 User Manual page 56

3 How to Install Accessories Inside Your PC
Installing Mass Storage Devices
8 Align the drive with the holes in the bottom of the PC. Support the
drive with your hand while securing the drive with the four screws
provided.
9 Support the power supply with your hand and very carefully return
the PC to the upright position.
10 Connect the data and power cables to the rear of the drive.
The connectors are shaped to fit one way only.
Data cable
11 If a device was removed from the middle shelf, replace it.
12 If no device was removed from the middle shelf, replace the RFI
bezel.
13 Install any other accessories before replacing the cover (see page
25). Reconnect all cables and power cords.
14 Refer to page 52 to complete the installation.
44 English
Power cable