Using The Hp Setup Program - HP Vectra XA6 User Manual

naja-3.fb4 Page 56 Wednesday, May 15, 1996 1:59 PM
3 Troubleshooting Your PC
The HP Summary Screen and Setup Program
When you press
following one, will appear:
XA/6xxx - Copyright 1996 Hewlett-Packard - GZ.xx.xx
BIOS Version : GZ.xx.xx
CPU Date Code : N/A
System RAM : 16 MB
Bank A : 8 MB (EDO)
Bank B : None
Bank C : None
Video RAM : 1 MB
System Cache : None
Video Device : Matrox
1st IDE Device : HDD 848 MB
2nd IDE Device : None
3rd IDE Device : None
4th IDE Device : None
ISA PnP : Not Installed
ISA PnP : Not Installed
<F1> to continue, <F2> to run Setup, <F10>to power off, <F5> to retain
This screen gives you a summary of the current configuration
settings of your PC.

Using the HP Setup Program

1 Turn on the display and then the PC. If the PC is already turned on,
save your data and exit all programs, then restart the PC. Consult
your operating system documentation for any special instructions
concerning turning off and then restarting your PC.
56 English
, the HP Summary Screen, similar to the
PC Serial Number
LAN Mac Address
COM1
COM2
COM3
COM4
LPT1
LPT2
LPT3
Flexible Disk A
Flexible Disk B
Display type
PCI Slot #1
PCI Slot #2
PCI Slot #3
: FR54011111
: 08-0009-85-03-00
: 3F8H (Serial A)
: 2F8H (Serial B)
: None
: None
: 378H
: None
: None
: 1.44 MB
: None
: Not Available
: Not Installed
: Not Installed
: Not Installed