If The Cd-Rom Drive Has A Problem - HP Vectra XA6 User Manual

Hp vectra xa6: users guide
Hide thumbs Also See for Vectra XA6:
Table of Contents

Advertisement

naja-3.fb4 Page 45 Wednesday, May 15, 1996 1:59 PM
If the Hard Disk
Activity Light Does
Not Work
NOTE
WARNING
If the hard disk activity light does not flicker when the PC is accessing
the hard disk drive:
Check that the control panel connector is firmly attached to the
system board.
Check that the disk power and data cables are correctly connected.
If you are using a hard disk drive with a controller board (a SCSI hard
disk, for example), the activity light does not flicker when the PC is
accessing the hard disk drive

If the CD-ROM Drive Has a Problem

Be sure to disconnect the power cord and any telecommunication
cables from your computer before you remove the cover to check the
cable connections or jumper settings.
To avoid electric shock and harm to your eyes by laser light, do not
open the CD-ROM drive enclosure. The CD-ROM drive should be
serviced by qualified service personnel only. Do not attempt to make
any adjustment of the unit. This PC is a class 1 laser product.
No Sound from the CD-ROM Drive
If you are having problems with sound when playing a CD:
Check that the volume control (if present) on the CD-ROM drive
front panel is not set to the minimum.
Ensure that the disk in the CD-ROM drive is an audio disk and not a
Photo CD or data CD.
If using headphones or external speakers, check that they are
properly connected.
Check that the CD audio cable is correctly installed and is connected
to the system board.
CD-ROM Drive is Idle
If the CD-ROM drive does not appear to be working, try accessing the
disk by clicking on the CD-ROM drive icon or drive letter assigned to
the CD-ROM drive by your operating system.
3 Troubleshooting Your PC
If Your PC Has a Hardware Problem
English
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vectra xa 6/xxx

Table of Contents