The Hp Summary Screen And Setup Program; Hp Summary Screen - HP Vectra XA6 User Manual

naja-3.fb4 Page 55 Wednesday, May 15, 1996 1:59 PM

The HP Summary Screen and Setup Program

This section introduces the HP Summary Screen and the HP Setup
program. You can use the Summary Screen and the Setup program to
configure your PC and solve configuration problems with your PC.

HP Summary Screen

Check your PC's configuration when you first use the PC and each time
after you install, remove, or upgrade accessories. To check the
configuration:
1 Turn on the display and then the PC. If the PC is already turned on,
save your data and exit all programs, then restart the PC. Consult
your operating system documentation for any special instructions
concerning turning off and then restarting your PC.
2 While the Vectra logo appears on your display, press
take you to the HP Summary Screen. (To go immediately into the
Setup program, and bypass the Summary Screen, press
of ). The Summary Screen will appear for only a short time. To
retain the screen indefinitely (until you decide to leave it), press
.
3 Troubleshooting Your PC
The HP Summary Screen and Setup Program
. This will
instead
English 55