Starting And Stopping Your Pc; Starting Your Pc; Stopping Your Pc - HP Vectra XA6 User Manual

naja-1.fb4 Page 8 Wednesday, May 15, 1996 1:54 PM
1 Setting Up and Using Your PC

Starting and Stopping Your PC

Starting and Stopping Your PC

Starting Your PC

1 Before you start your PC, always switch on the display first.
2 Start your PC in one of these ways:
press the power button on the front panel
•
press the space bar.
•
When you switch on the computer, the computer carries out the
Power-On-Self-Test (POST) while the Vectra logo is displayed. If
you wish to view the POST details, press
Summary Screen. If there is an error in the POST, the error will
automatically be displayed.
3 If you have set a password in the PC's Setup program, the password
prompt displays after the POST has completed. If the Password
prompt is displayed, type your password and press
able to use the PC.

Stopping Your PC

To stop the PC, make sure that you have exited all programs and the
operating system (if necessary), and then press the power button on
the control panel.
Refer to the operating system manual for details of how to exit the
operating system.
8 English
to get the HP
to be