naja-1.fb4 Page 4 Wednesday, May 15, 1996 1:54 PM
1 Setting Up and Using Your PC
Connecting to a Network
Connecting to a Network
Let your Network Administrator know you are connecting your PC to
the network. Connect the network cable to the RJ-45 UTP (Unshielded
Twisted Pair) LAN connector.
To enable your network connection, refer to the Integrated Network
Interface Submenu in the Configuration Menu of the HP Setup
program.
NOTE
If you need a BNC Coax connector to connect to the network, you can
install an optional BNC coax adapter (order HP D3979A). Refer to
"Installing a BNC Coax Adapter", on page 30.
4
English