HP Vectra XA6 User Manual page 43

naja-2.fb4 Page 33 Wednesday, May 15, 1996 1:56 PM
CAUTION
5 To install the new processor:
a Locate the corner markers:
on the processor—a dot or notch ("broken" corner)
•
on the processor socket—a dot.
•
b Position the processor over the socket, with it's corner marker
facing the corner marker on the socket.
c Place the processor into the socket.
d Lower the lever to lock the processor into place.
e Replace the heatsink and fasten the clip, if the heatsink is not
directly attached to the processor.
Do not change the system board switches after you install a new
processor.
6 Replace the computer's power supply and cover. Reconnect all
cables and power cords.
2 How to Install Accessories In Your PC
Installing an OverDrive Processor
English 33