HP Vectra XA6 User Manual page 61

naja-3.fb4 Page 51 Wednesday, May 15, 1996 1:59 PM
WARNING There is a danger of explosion if the battery is incorrectly installed. For
your safety, never attempt to recharge, disassemble, or burn the old
battery. Replace the battery only with the same or equivalent type
recommended by the manufacturer. The battery in this PC is a lithium
battery which does not contain heavy metals, nevertheless, in order to
protect the environment, do not dispose of batteries in household
waste. Please return used batteries to the shop from which you bought
them, or to the dealer from whom you purchased your PC, or to HP, so
that they can either be recycled or disposed of in an environmentally
sound way. Returned used batteries will be accepted free of charge.
After removing the computer's cover:
1 Remove the old battery by sliding it from under the retaining clip
(note the position of the cross).
2 Place the new battery in the battery holder, with the cross in the
same position as the old battery, and ensure that it is properly
seated. Ensure that the clip is in place and holds the battery firmly.
You can also install an external battery (HP part number 1420-0513),
which you can order from your authorized reseller, as follows:
1 After removing the computer's cover, connect the external battery
cable to the battery connector on the system board.
2 Mount the external battery on the side of the power supply, using the
self-adhesive strip supplied.
After installing either a replacement or an external battery, replace the
computer's cover. Reconnect all cables and power cords. Run the
Setup program to reconfigure the computer.
3 Troubleshooting Your PC
Changing the Battery
English 51