Unpacking Your Pc - HP Vectra XA6 User Manual

naja-1.fb4 Page 2 Wednesday, May 15, 1996 1:54 PM
WARNING
Operating System
Installation Tools
1 Setting Up and Using Your PC

Unpacking Your PC

Unpacking Your PC
1 When you receive your PC, unpack all the components.
If you have any doubt that you can lift the PC or display safely, do not
try to move it without help.
Computer
Computer Power Cord
Keyboard
2 Place the PC on a sturdy desk near to easily accessible power outlets,
with enough space for the keyboard, mouse, and any other
accessories.
3 Position the PC so that its rear connectors are easily accessible.
4 Place the display on top of the computer. If you have a large display,
place it next to the computer. Refer to the display's manual for
information about the display.
Your PC's operating system is packed separately inside the box that
contains your PC.
No tools are required to set up your PC. However, if you plan to install a
disk drive or an accessory board in your PC, you will need a flat-blade
screwdriver. For further information about installing accessories, "How
to Install Accessories In Your PC", on page 13.
2 English
Typical Display
Mouse
Two HP CD-ROMs:
Drivers
Documentation
Display Power Cord
Manuals