Control Button Shortcuts - GLP impression X5 User Manual

Hide thumbs Also See for impression X5:
Table of Contents

Advertisement

German Light Products®
When navigating through the menus:
BACK – Goes back one level towards the top of the menu
UP – Scrolls up or increments a number
DOWN – Scrolls down or decreases a number
ENTER – Confirms a setting or implements a command
At any time:
+
UP and DOWN at the same time – Temporarily rotates the display 180°

Control button shortcuts

Battery Eco Mode (available in Battery Mode only)
While in Battery Mode, holding MENU and ENTER together for 10 seconds activates
Battery Eco Mode. This switches off the display completely to avoid any unwanted
discharge of the battery and can be very useful when a fixture is put into long-term
storage.
Live Diagnostics
Pressing UP or DOWN three times calls up an overview of all main fixture information,
signal quality and settings. This can be useful if you are troubleshooting or if you are in
contact with GLP Service.
Toggle Display Orientation
Pressing and releasing UP and DOWN together rotates the display through 180°.
Note
If Display Orientation is set to Auto, changing the display orientation by pressing UP and
DOWN at the same time will only change the display orientation until the next power
cycle. To change the display orientation permanently, go to Fixture Settings → Display
Orientation in the control panel menus.
Rev. 20220720-01
27

Advertisement

Table of Contents
loading

Table of Contents