Dimmer; Individual Segment Or Pixel Control - GLP impression X5 User Manual

Hide thumbs Also See for impression X5:

Table of Contents

German Light Products®

Note

Depending on the selected Subfixture Mode, the dimmer and shutter channels of the

Sub modules can operate independently of or subordinately to the dimmer and

shutter channels of the Main module.

Dimmer

The electronic dimming effect provides smooth 16-bit dimming of the Main module

and Sub modules.

Dimming curves

See Figure 1. Three dimming curve options are available: Linear, S-Curve and Soft.

● The Linear setting gives a dimming curve that the eye perceives as linear.

● The S-Curve setting gives finer control at lower light levels and at higher light levels,

with coarser control at medium light levels.

● The Soft setting gives finer control at lower light levels, where the eye is most

sensitive to changes in light intensity, and coarser control at higher light levels.

You can select the dimming curve using the control panel or via DMX on the

Special/Control channel.

Note

Depending on the selected Subfixture Mode, the dimmer and shutter channels of the

Sub modules can operate independently of or subordinately to the dimmer and

shutter channels of the Main module.

The impression X5 offers 19 individually controllable pixels. Each pixel cell houses a 40 W

RGBL LED that can be controlled individually in intensity and color for creating

dynamic effects and pixel mapping.

Figure 1. Dimming curves

Rev. 20220720-01

Table of Contents