Magenta/Green Shift (M/G Shift); Color Wheel; Tungsten Simulation - GLP impression X5 User Manual

Hide thumbs Also See for impression X5:
Table of Contents

Advertisement

German Light Products®
Note
The CQC channel affects all the fixture's modules. Setting the CQC channel to a
specific value will affect the colors of the Main module and Sub modules.

Magenta/Green Shift (M/G Shift)

The Magenta/Green Shift channel lets you move the color coordinate of a white point,
a mixed color or a selected CTC color along a vertical line on the color temperature
curve in all three ColorMix modes. The corresponding white point is either shifted
towards Green or Magenta.
If M/G Shift is enabled, it immediately affects all mixed colors as well as the color
temperature that is selected on the CTC channel. It has no effect on the colors of the
virtual color wheel.
Note
The M/G Shift channel affects the entire fixture. Setting the M/G Shift channel to a
specific value will affect the output of the Main module and Sub modules.

Color wheel

The impression X5 features a virtual color wheel channel that gives quick access to a
wide range of LEE-referenced colors in all three ColorMix modes. Color wheel color
presets are always mixed with the best available spectrum. Color filter color
coordinates are based on a Source C (daylight) light source.
Besides static color presets, the color wheel channel also offers continuous color
scrolling in rainbow colors. When set to Rainbow, the fixture runs through the typical
colors of a rainbow with speed variable from slow to fast.
The crossfade time of a color change is relative to the speed: at slow speeds colors
crossfade smoothly and at fast speeds colors snap.
If a color coordinate is outside the possible color gamut of the light source, the fixture
tries to match the target color as closely as possible.
Note
Color wheel color presets have higher priority than the ColorMix, CTO and M/G Shift
channels.
The virtual color wheel channel must be set to DMX 000 in order to use normal RGB,
RGBL or x:y color mixing.

Tungsten simulation

When a tungsten lamp is dimmed, there is a small delay in intensity changes and there
is a color shift along the black body line. The tungsten simulation channel allows the
user to select between different tungsten options in all three ColorMix modes.
Rev. 20220720-01
11

Advertisement

Table of Contents
loading

Table of Contents