Control Panel; Default Information Screen - GLP impression X5 User Manual

German Light Products®

4. Control panel

Warning! DMX control is disabled when the control menus are active. Be
prepared for the head to move as soon as you exit the control menus.
The control panel and backlit graphic LCD display with self-charging battery allow you
to change fixture settings, view readouts and use utilities quickly and intuitively, even
when the fixture is disconnected from power.
To allow comfortable use of the control panel, pan and tilt are automatically disabled
for a few seconds if you turn the yoke manually. Pressing any button on the control
panel also disables pan and tilt for a few seconds. Pan and tilt remain disabled for as
long you are working in the control panel. If no button is pressed for a few seconds,
head movement is re-enabled with pan and tilt correction applied.

Default information screen

When power is applied, the fixture performs a reset. After the reset has completed, the
default information screen appears in the control panel display on the side of the
yoke.
At any other time, you can press any key to unlock the control panel. Doing this also
calls up the default information screen in the control panel display.
1.0.0/M1
001
(1...24)
Figure 2. Default information screen
Rev. 20220720-01
Optimal
DMX
25