Configuring A Scsi Hard Disk Drive - HP Vectra VL5 3 User Manual

Configuring a SCSI Hard Disk Drive

# $ K +
If you have installed a SCSI hard disk drive, configure it in SETUP.
1. Highlight the Drive 1
and change it to None or SCSI .
2. Ensure that the Interface field is set to Integrated.
3. Highlight the SCSI BIOS Shadowing field, and change it to Enabled. The SCSI BIOS
cannot be shadowed if it is in segment C000h.
NOTE The SCSI BIOS ROM Address
the SCSI adapter board's setting. (For how to configure the SCSI adapter, refer
to its manual.
a Fast IDE hard disk drive connector
(supporting up to two IDE hard disk drives).
The PC has an integrated Fast IDE controller which supports two Fast IDE hard disk drives.
This may cause a problem if you have a SCSI hard disk system.
#
ConfiguringaSCSIHardDiskDrive.40
$
Configuring a SCSI Hard Disk Drive
K
Configuring a SCSI Hard Disk Drive
+
SECTION3:0105
HP Vectra VL5 PC User's Guide - Part 2Error! No text of specified style in document.
43
primary (rear drive) or Drive 2
field cannot be changed. It allows you to view
secondary (front drive) field,