HP Vectra VL5 3 User Manual page 51

If You Select the Wrong Display in the HP User Tools Menu
# $ K +
If you select the wrong display in the HP User Tools menu, the display screen may become
blurred or unreadable. To correct this problem:
1. Restart the PC
The PC will perform its power-on-self-test (POST).
2. When the POST completes, press [F5] to bypass the startup files and display the MS-DOS
prompt (C:\).
3. Type CD C:\WINDOWS.
4. Type SETUP [ENTER].
5. Press the up-arrow key to select the Display line, and press [ENTER].
6. Select the 640x480x16 line, and press [ENTER].
7. Press [ENTER] again to accept the configuration.
8. Press [CTRL] [ALT] and [DELETE] to restart the pC.
9. If necessary, type WIN [ENTER] to restart Windows.
10. When Windows starts, select the correct display with the HP User Tools. Refer to chapter 2
for more information about the HP User Tools.
#
IfYouSelecttheWrongDisplayintheHPUserToolsMenu.47
$
If You Select the Wrong Display in the HP User Tools Menu
K
If You Select the Wrong Display in the HP User Tools Menu
+
SECTION4:0030
HP Vectra VL5 PC User's Guide - Part 2Error! No text of specified style in document.
51
either switch the PC off then on, or press [CTRL] [ALT] and [DELETE].