Connecting The Power Cords - HP Vectra VL5 3 User Manual

Connecting the Power Cords

# $ K +
1. If fitted, remove the label covering the computer's power connector.
2. Connect the power cords to the display and the computer.
3. Connect the display's power cord and the computer's power cord to a grounded outlet. (The
connectors are shaped to go in one way only.)
WARNING For your safety, always connect the equipment to an earthed wall outlet.
Always use a power cord with properly earthed plugs such as the one
provided with this equipment or in compliance with your national regulation.
This PC has been designed to operate on all power systems, including IT
power systems. It is disconnected from the power by removing the power cord
from the power outlet. This means the PC must be located close to a power
outlet that is easily accessible.
#
ConnectingthePowerCords.6
$
Connecting the Power Cords
K
Connecting the Power Cords;power;IT power systems
+
SECTION1:0015
HP Vectra VL5 PC User's Guide - Part 2Error! No text of specified style in document.
9
{bmc help0004.wmf}