HP Vectra VL5 3 User Manual page 82

Selecting the IRQs used by Accessory Boards
# $ K
If you have installed an ISA accessory board that uses IRQ 9, 10, 11, or 15, you must tell
SETUP which IRQ it uses. This allows PCI devices to be automatically configured. You
should always leave at least one IRQ free for use by the integrated PCI devices.
IRQ 12 is used by the mouse. If you do not use a mouse, IRQ 12 can be used by accessory
boards.
1. Highlight the IRQ field you want to change, for example IRQ 11 .
2. Press [F7] or [F8] to make the IRQ available (Available for PCI ) or make it unavailable
(Used by an ISA Board ).
#
SelectingtheIRQsusedbyAccessoryBoards.77
$
Selecting the IRQs used by Accessory Boards
K
Selecting the IRQs used by Accessory Boards
HP Vectra VL5 PC User's Guide - Part 2Error! No text of specified style in document.
82