Starting And Stopping Your Pc - HP Vectra VL5 3 User Manual

Starting and Stopping Your PC

# $ K +
This chapter explains how to configure your PC the first time you use it.
You start your PC by pressing the power button on the display and on the PC. If you have
set a User Password in the PC's SETUP program, the power-on prompt appears when you
switch on the PC. If the power-on prompt is displayed, type your User Password and press
to use the PC.
[ENTER]
To stop your PC, first make sure that you have exited all programs then press the power
button. Refer to your operating system manual for details if you are not sure how to exit your
operating system.
#
StartingandStoppingYourPC.9
$
Starting and Stopping Your PC
K
Starting and Stopping Your PC;PC;power-on prompt;power
+
SECTION2:0000
HP Vectra VL5 PC User's Guide - Part 2Error! No text of specified style in document.
12
{bmc help0007.wmf}