Installing An Ide Hard Disk Drive In The Rear Shelf - HP Vectra VL5 3 User Manual

Installing an IDE Hard Disk Drive in the Rear Shelf

# $ K +
The PC has an integrated Enhanced IDE controller which supports two Fast IDE hard disk
drives.
Refer to the drive's manuals to see if you must set jumpers or if there is a special installation
procedure to follow.
1. Disconnect the computer's power supply cord.
2. Remove the computer's cover.
3. Place the drive with its label uppermost on the frame above the disk drives.
4. Align the drive with the hinges on the rear drive shelf. Then insert it into the hinges.
5. Rotate the drive on its hinges. Secure it using the screw provided.
6. Connect the power cable and the data cable to the rear of the drive. (The connectors are
shaped to go in one way only.)
7. Install any other accessories before replacing the cover.
8. Refer to "Completing the Installation of an IDE Drive" to complete the installation.
#
InstallinganIDEHardDiskDriveintheRearShelf.34
$
Installing an IDE Hard Disk Drive in the Rear Shelf
K
Installing an IDE Hard Disk Drive in the Rear Shelf;IDE drives;installing
+
SECTION3:0075
HP Vectra VL5 PC User's Guide - Part 2Error! No text of specified style in document.
37
{bmc help0036.bmp}
{bmc help0037.bmp}
{bmc help0038.wmf}