Understanding The Setup Program - HP Vectra VL5 3 User Manual

Understanding the SETUP Program

# $ K +
The built-in SETUP program is accessed by pressing F2] during the PC's power-on-self-test.
For more information about SETUP items press [F1] for context-sensitive online help (in
English only).
The SETUP items displayed on your screen may differ from those shown below.
SETUP Item:
Date
Time
User Preferences
Processor
Computer Speed
Memory Size
Memory Cache
Power Management
Hard Disk Drives
SCSI
Flexible Disk Drives
#
UnderstandingtheSETUPProgram.63
$
Understanding the SETUP Program
K
Understanding the SETUP Program
+
SECTION4:0100
HP Vectra VL5 PC User's Guide - Part 2Error! No text of specified style in document.
67
What you can do:
Set date and time
Set a Password to prevent unauthorized access to your PC
Set the: Keyclick Volume, Character Repeat Speed,
Autorepeat Delay, Numlock On/Off at power up.
View the type of processor in your PC
View the speed of the processor
View the memory size of:
Base Memory on system board
Reserved Memory
Extended Memory
Total Memory
Switch Cache Memory Off/On
Enable/Disable 'Standby' mode
Enable/Disable 'Sleep At' mode
Configure the hard disk drives
Define if the hard disk controller is integrated on the system
board or on an accessory board
View the SCSI BIOS ROM address for an HP SCSI Accessory
Board
Disable/Enable shadowing of the SCSI BIOS
Configure the flexible disk drives
Choose which flexible disk drive to boot the system from
Define if the flexible disk controller is integrated on the system
board or on an accessory board