Advertisement
The filter pump
does not work.
The spa tub is in
an abnormal
shape.
The spa is
losing air.
The water is not
clean.
26
Power failure
The filter cartridge is stuck
due to dirt or other objects.
The water level is too low.
There is extra air pressure
inside due to strong sunlight.
The air valve is loose.
There may be a hole or split
on the spa tub.
Insufficient filtering time
Dirty filter cartridge
Improper water maintenance
Check the power supply.
Clean or replace filter cartridge.
Add water until the water level reaches at
least the minimum water line.
Check the air pressure and release air if
necessary to avoid damage to the spa.
• Inflate the spa until the Yellow section
of the manometer is pushed out.
Ensure the valve is screwed tightly.
•
Replace the valve if necessary.
• Fill a squeeze bottle with soapy water
and squirt on the seams. If there is a
leak, small bubbles will come out from
the source.
When you have located the leak, clean
•
and dry the leaking area, then use the
repair kit and follow the steps outlined
in the 'Spa tub repair' section of this
user guide.
Extend the filtration time.
Clean or replace the filter cartridge.
Refer to the chemical manufacturer's
instructions for maintaining the quality of
water.
Advertisement
