Advertisement
Ensure the manometer shows the Yellow section in the
following conditions:
• After inflation but before filling the spa with water.
• When leaving the spa outdoors unattended for an
extended period at a temperature higher than 20°C.
Ensure the manometer shows the Green section in the
following conditions:
• When the spa is filled with water.
• When the spa is being used.
WARNING: If the manometer shows the White section, the
spa is over-inflated.
• Slightly rotate the manometer cap anti-clockwise to
release some air.
• Tighten the cap after the pointer returns to the Green or
Yellow section.
6. Installing the filter cartridge
• Attach the cartridge base to the spa tub inlet (upper position) and turn it clockwise to
secure.
• Put the mesh cover on the filter cartridge then attach the filter cartridge to the
cartridge base. The filter cartridge should stay secure when the spa is filled with
water.
Notes:
• The cartridge base is designed to be screwed on and off. Do not exert force as
this could cause damage.
• Always use a filter cartridge when the spa is in use and filled with water.
Yellow
Yellow
Green
Yellow
Green
White
13
Advertisement
