Advertisement
4. From the inside of the spa tub, open the
drain valve cap. Water will start to flow out
through the garden hose.
When the water stops draining, lift the spa
tub towards the drain, pouring out any
remaining water to empty the spa.
5. Press the BUBBLE button on the controller
to dry out any water in the piping system.
Operate the bubbling function for 15
minutes to blow out all the remaining water.
6. Use a clean towel to wipe up any remaining
water and moisture on the spa tub and
controller.
Filter cartridge
Inspect and clean the filter cartridge after each use.
• Change the filter cartridge after it has used for 150 hours or after seeing a cleaning
reminder as indicated by the FILTER button.
• Pull out the filter cartridge from the base.
• Use a garden hose to rinse off the cartridge.
• Reinstall the clean or spare cartridge back onto the spa tub wall.
21
Advertisement
