Table of Contents
Advertisement
COMMISSIONING
ATTACHING FASCIA ASSEMBLY
Attach the Fascia to the Heater Engine
Ensure the CAT5 cable (A) is installed into the ON/OFF button on the frame and clipped in place in the front
1.
of the fire (B).
2.
Fit the frame over the top flange of the fire to prevent it becoming out of place.
Fix the frame to the fire using the two supplied black M4 screws ( 3 ) .
3.
It is CRITICAL to the safe operation of the fire that these screws are in place (seals the fire).
IMPORTANT
4.
Fit the inner frame to the fire by setting it into the allocated slot of the outer frame and sliding it down.
On the PCB control panel ( B ) , return the button to the ON position. Check the operation of the ON/OFF
5.
button on the frame and that the remote control is working.
Ensure you DO NOT place excessive tension on or pinch the communication cable when
manoeuvring the fascia into position.
NOTE
The glass of the fascia fitted to this appliance reduces the risk of fire and injury and no part of it
MUST be permanently removed.
NOTE
For protection of young children or the infirm a secondary guard (not supplied) is required.
Rinnai
1
4
3
A
B
3
34
2
SS850 Freestanding IM
Advertisement
Table of Contents
