Table of Contents
Advertisement
Manual Startup
and Shutdown
Table 4
System Status LED
Battery
Battery
Sleep
Extremely
Low
Low
Y
Y
VX 600
Bluetooth
Agnostic
Device
Connections
Connecting to a
Host Computer via
micro-USB Cable
To connect to a host
computer
To manually startup and shutdown the VX 600 Bluetooth Agnostic, press and hold
either the Cancel key or Power button, depicted in
The system status LEDs beside the micro-USB port indicate the status of the
device when turned on.
Battery
Charging
Y
Y
Connect the VX 600 Bluetooth Agnostic to other devices using the Micro-USB
cable or via Bluetooth.
The same micro-USB cable used to charge the battery can also be used to
connect the VX 600 Bluetooth Agnostic to a host computer to synchronize data or
update the device's firmware.
1
Disconnect power from the host computer.
2
Connect the micro-USB cable into the port located on the left side of the
VX 600 Bluetooth Agnostic.
3
Connect the other end of the micro-USB cable into the host computer's USB
port.
Charging
Firmware
Timer
Upgrade
Fault
Y
Y
VX 600 B
Manual Startup and Shutdown
Figure
2.
LED Behaviour
Green (Blinks every 4 seconds)
Red, 1Hz rate, 50% duty cycle
(battery extremely low condition:
battery voltage < 3.6V)
Red, 4Hz rate, 50% duty cycle
(battery low condition: battery
voltage < 3.7V)
Red on continuously
Orange, 1Hz rate, 50% duty cycle
Orange on continuously
Green on continuously
A
I
LUETOOTH
GNOSTIC
NSTALLATION
D
S
EVICE
ETUP
17
G
UIDE
Advertisement
Table of Contents
